Vagus-MTAF-Silver Description Film: 90 micron silver PET aluminized film; Adhesive: Removable Transparent Adhesive; Release liner: 125mic PET; Width: 1.27/1.37/1.52m; TECHNICAL DATA SHEET Data Sheet Item Unit Value Tested Method Thickness- Pet μm 70±10 GB/T6672-2001 Weight-Liner g/m2 175±10 GB4669-1995 Weight-finished product g/m2 295±20 GB4669-1995 Gloss Rate 60° % >70 GB8807-88 Initial adhesive 24h N/25mm >8 FTM 9 180°peel Dimensional N/25mm >5 FTM 1 Dimensional stability MD mm <_0.8 FTM 14 Dimensional stability CD mm <_0.5 FTM 14 Tensile strength MD N/25mm >45 GB/T1040.1-2006 Tensile strength CD N/25mm >40 GB/T1040.1-2006 Construction Temperature °C 20±10°C Applicable Temperature °C -20 ~ +70 Applied Printers : Inkjet printing with Solvent/ ECO Solvent based inks, UV or Latex inks Declaration:Please choose VAGUS products suitably according to relative provisions or industrial standards. VAGUS bears the responsibility for the specified technical and performance data on this page only. VAGUS is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable)
Vagus-MTAF-Silver Description Film: 90 micron silver PET aluminized film; Adhesive: Removable Transparent Adhesive; Release liner: 125mic PET; Width: 1.27/1.37/1.52m; TECHNICAL DATA SHEET Data Sheet Item Unit Value Tested Method Thickness- Pet μm 70±10 GB/T6672-2001 Weight-Liner g/m2 175±10 GB4669-1995 Weight-finished product g/m2 295±20 GB4669-1995 Gloss Rate 60° % >70 GB8807-88 Initial adhesive 24h N/25mm >8 FTM 9 180°peel Dimensional N/25mm >5 FTM 1 Dimensional stability MD mm <_0.8 FTM 14 Dimensional stability CD mm <_0.5 FTM 14 Tensile strength MD N/25mm >45 GB/T1040.1-2006 Tensile strength CD N/25mm >40 GB/T1040.1-2006 Construction Temperature °C 20±10°C Applicable Temperature °C -20 ~ +70 Applied Printers : Inkjet printing with Solvent/ ECO Solvent based inks, UV or Latex inks Declaration:Please choose VAGUS products suitably according to relative provisions or industrial standards. VAGUS bears the responsibility for the specified technical and performance data on this page only. VAGUS is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable)
Description Film: 90 micron silver PET aluminized film; Adhesive: Removable Transparent Adhesive; Release liner: 125mic PET; Width: 1.27/1.37/1.52m; TECHNICAL DATA SHEET Data Sheet Item Unit Value Tested Method Thickness- Pet μm 70±10 GB/T6672-2001 Weight-Liner g/m2 175±10 GB4669-1995 Weight-finished product g/m2 295±20 GB4669-1995 Gloss Rate 60° % >70 GB8807-88 Initial adhesive 24h N/25mm >8 FTM 9 180°peel Dimensional N/25mm >5 FTM 1 Dimensional stability MD mm <_0.8 FTM 14 Dimensional stability CD mm <_0.5 FTM 14 Tensile strength MD N/25mm >45 GB/T1040.1-2006 Tensile strength CD N/25mm >40 GB/T1040.1-2006 Construction Temperature °C 20±10°C Applicable Temperature °C -20 ~ +70 Applied Printers : Inkjet printing with Solvent/ ECO Solvent based inks, UV or Latex inks Declaration:Please choose VAGUS products suitably according to relative provisions or industrial standards. VAGUS bears the responsibility for the specified technical and performance data on this page only. VAGUS is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable)
