LG-LAMHEAL Description PET Lamination Film Film: 150micron PET； Adhesive: Clear Adhesive Release liner: 25micron PET Width: 1.27m TECHNICAL DATA SHEET Data Sheet Testing condition: Indoor temperature 23±2°C; Relative humidity 50±5%; Use aluminum, glass, steel plate as the base material for testing. Item Unit Value Tested Method PVC film thickness μm 150±10 GB/T6672-2001 Weight-Liner g/m2 25±10 GB4669-1995 Weight -finished product g/m2 250±20 GB4669-1995 Initial Adhesion N/25mm >8 FTM 9 24h, 180°peel N/25mm >10 FTM 9 Dimensional stability MD mm <0.5 FTM 14 Dimensional stability CD mm <0.5 FTM 14 Tensile strength MD N/25mm >50 FTM14 Tensile strength CD N/25mm >40 GB/T1040.1-2006 Construction Temperature °C 20±10°C GB/T1040.1-2006 Applicable Temperature °C -20 ~ +70 Applied Printers : Inkjet printing with Solvent/ ECO Solvent based inks, UV or Latex inks Declaration:Please choose VAGUS products suitably according to relative provisions or industrial standards. VAGUS bears the responsibility for the specified technical and performance data on this page only. VAGUS is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable)
LG-LAMHEAL Description PET Lamination Film Film: 150micron PET； Adhesive: Clear Adhesive Release liner: 25micron PET Width: 1.27m TECHNICAL DATA SHEET Data Sheet Testing condition: Indoor temperature 23±2°C; Relative humidity 50±5%; Use aluminum, glass, steel plate as the base material for testing. Item Unit Value Tested Method PVC film thickness μm 150±10 GB/T6672-2001 Weight-Liner g/m2 25±10 GB4669-1995 Weight -finished product g/m2 250±20 GB4669-1995 Initial Adhesion N/25mm >8 FTM 9 24h, 180°peel N/25mm >10 FTM 9 Dimensional stability MD mm <0.5 FTM 14 Dimensional stability CD mm <0.5 FTM 14 Tensile strength MD N/25mm >50 FTM14 Tensile strength CD N/25mm >40 GB/T1040.1-2006 Construction Temperature °C 20±10°C GB/T1040.1-2006 Applicable Temperature °C -20 ~ +70 Applied Printers : Inkjet printing with Solvent/ ECO Solvent based inks, UV or Latex inks Declaration:Please choose VAGUS products suitably according to relative provisions or industrial standards. VAGUS bears the responsibility for the specified technical and performance data on this page only. VAGUS is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable)
Description PET Lamination Film Film: 150micron PET； Adhesive: Clear Adhesive Release liner: 25micron PET Width: 1.27m TECHNICAL DATA SHEET Data Sheet Testing condition: Indoor temperature 23±2°C; Relative humidity 50±5%; Use aluminum, glass, steel plate as the base material for testing. Item Unit Value Tested Method PVC film thickness μm 150±10 GB/T6672-2001 Weight-Liner g/m2 25±10 GB4669-1995 Weight -finished product g/m2 250±20 GB4669-1995 Initial Adhesion N/25mm >8 FTM 9 24h, 180°peel N/25mm >10 FTM 9 Dimensional stability MD mm <0.5 FTM 14 Dimensional stability CD mm <0.5 FTM 14 Tensile strength MD N/25mm >50 FTM14 Tensile strength CD N/25mm >40 GB/T1040.1-2006 Construction Temperature °C 20±10°C GB/T1040.1-2006 Applicable Temperature °C -20 ~ +70 Applied Printers : Inkjet printing with Solvent/ ECO Solvent based inks, UV or Latex inks Declaration:Please choose VAGUS products suitably according to relative provisions or industrial standards. VAGUS bears the responsibility for the specified technical and performance data on this page only. VAGUS is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable)
